Apollo Mechanical Industries : Pressure pump, LDO pump, Burner pump, Hot Oil pump, Gear pump

Fuel Injection Internal Gear Pump

Salient Feature:

We are very glad to inform that DURGA FUEL injection internal gear pumps are prepared by graded cast iron. These gear and shafted Rotor give better performance with closed tolerance to give long life. This FIG pumps is flange mounted kind. These pumps are self priming type produces max. vacuum determined by the cavity between the gear teeth. This pump has modified profile teeth cutting to give accurate capacity with in the pressure range. This pump runs liquid up to 500 cst viscosity and upto temperature 200 °C .

	FIG Pumps is Technically Application for Pumping in Oil Burner, Boiler, Hydraulic, Heating Systems, Fuel Injection with Pressuring and Transfer.
	This Pumps Handling Fuel Like LDO, FO Diseal, HSD and LSHS.
	This Pumps is for use in ?Non Corrosive and Non abrasive Liquids.
	The Mechanical Seal to ensure Zero Leakage at Maximum Pressure.
	This Pumps is Various Type of Industrial Application like can be used as well as Booster Pump for Diseal Locomotive, Oil Transfer and Heating System. This Pump is Built in Pressure Relief Valves and Capacity by-pass.

Dimensions

Graph

MODEL	L1	L2	L3	L4	L5	C1	C2	C3	C4	C5	S1	S2	S3	D1	D2	D3	D4	D5	K1	K2	K3	K4	K5	K6	K7	K8	T1	T2
DURGA-150	39	87	15	22	42.8	46	34.5	80.5	90	49.5	43	28	46	72	54	28	12	10.5	58	14	17	37	22	72	76	148	1/2"BSP	1/4"BSP

	All Dimensions are in millimeters. Unless otherwise stated specifications are subject to charge without prior notice as improvements are made from time to time.
	These pumps give max. pressure of 35 kg/cm2 yet for continuous duty max. recommended pressure is 30 kg/cm2 pump can also be used at 2800 R.P.M the capacity will have approx. Double of normal duty condition. Pump rotation of direction can be clockwise & anti-clockwise as per requirements.
	We wish to associate ourselves with you to serve you better, faster and at reasonable prices .We request your kind co-operation in our endeavour and assure you of our best attention is given a chance.
	Every Durga FIG pump is tested 100% for its performance at 1440 rpm with oil of viscocity 35 cst at normal working temp. and pressure and pressure of 30 kg/cm2.

Approximate Performance Chart:

Sr.	Delivery capacity Lit./ hr with Pressure of 0-35 bar adjustable	In/Out Suction & Delivery	Motor Speed RPM	Motor HP		PARTS	MATERIAL
Sr.		In/Out Suction & Delivery	Motor Speed RPM	15 kg/cm²	30 kg/cm²	PARTS	MATERIAL
1	150	1/2" x 1/2"	1440	^0.75	^1.5	Pump Body	CI Gr. 20
2	300	1/2" x 1/2"	1440	^0.75	^1.5	^Eccentric	CI Gr. 20
3	450	1/2" x 1/2"	1440	¹	^1.5	Idler Gear	SAE - 8620
4	600	1/2" x 1/2"	1440	¹	²	Piston	EN - 8
5	¹⁰⁰⁰	^{3/4" x 3/4"}	1440	²	³	Shafted Rotor	SAE - 8620
⁶	¹⁵⁰⁰	^{3/4" x 3/4"}	1440	²	³	Spring	Spring Steel
⁷	²⁰⁰⁰	^{3/4" x 3/4"}	1440	³	⁵	Mechanical Seal	En - 8
⁸	²⁵⁰⁰	^{3/4" x 3/4"}	1440	³	⁵	Adjusting Screw	En - 8
⁹						Bush	Bronze