Home Product Profile Contact Feedback
Different types of Pumps Manufacturer
Image Welcome to Apollo Mechanical Industries


Bullet

Fuel Injection Internal Gear Pump

Fuel Injection Internal Gear Pump

Bullet

Salient Feature:

We are very glad to inform that DURGA FUEL injection internal gear pumps are prepared by graded cast iron. These gear and shafted Rotor give better performance with closed tolerance to give long life. This FIG pumps is flange mounted kind. These pumps are self priming type produces max. vacuum determined by the cavity between the gear teeth. This pump has modified profile teeth cutting to give accurate capacity with in the pressure range. This pump runs liquid up to 500 cst viscosity and upto temperature 200 °C .

 Bullet
FIG Pumps is Technically Application for Pumping in Oil Burner, Boiler, Hydraulic, Heating Systems, Fuel Injection with Pressuring and Transfer.
 Bullet
This Pumps Handling Fuel Like LDO, FO Diseal, HSD and LSHS.
 Bullet
This Pumps is for use in ?Non Corrosive and Non abrasive Liquids.
 Bullet
The Mechanical Seal to ensure Zero Leakage at Maximum Pressure.
 Bullet
This Pumps is Various  Type of Industrial Application like can be used as well as Booster Pump for Diseal Locomotive, Oil Transfer and Heating System. This Pump is Built in Pressure Relief Valves and Capacity by-pass.

Bullet

Dimensions

Graph

Graph

MODEL L1 L2 L3 L4 L5 C1 C2 C3 C4 C5 S1 S2 S3 D1 D2 D3 D4 D5 K1 K2 K3 K4 K5 K6 K7 K8 T1 T2
DURGA-150 39 87 15 22 42.8 46 34.5 80.5 90 49.5 43 28 46 72 54 28 12 10.5 58 14 17 37 22 72 76 148 1/2"BSP 1/4"BSP

 Bullet
All Dimensions are in millimeters. Unless otherwise stated specifications are subject to charge without prior notice as improvements are made from time to time.
 Bullet
These pumps give max. pressure of 35 kg/cm2 yet for continuous duty max. recommended pressure is 30 kg/cm2 pump can also be used at 2800 R.P.M the capacity will have approx. Double of normal duty condition. Pump rotation of direction can be clockwise & anti-clockwise as per requirements.
 Bullet
We wish to associate ourselves with you to serve you better, faster and at reasonable prices .We request your kind co-operation in our endeavour and assure you of our best attention is given a chance.
 Bullet
Every Durga FIG pump is tested 100% for its performance at 1440 rpm with oil of viscocity 35 cst at normal working temp. and pressure and pressure of 30 kg/cm2.

Bullet

Approximate Performance Chart:

Sr. Delivery capacity Lit./ hr with Pressure of 0-35 bar adjustable In/Out Suction & Delivery Motor Speed RPM

Motor HP

PARTS MATERIAL
15 kg/cm2 30 kg/cm2
1 150 1/2" x 1/2" 1440 0.75 1.5 Pump Body CI Gr. 20
2 300 1/2" x 1/2" 1440 0.75 1.5 Eccentric CI Gr. 20
3 450 1/2" x 1/2" 1440 1 1.5 Idler Gear SAE - 8620
4 600 1/2" x 1/2" 1440 1 2 Piston EN - 8
5 1000 3/4" x  3/4" 1440 2 3 Shafted Rotor SAE - 8620
6 1500 3/4" x  3/4" 1440 2 3 Spring Spring Steel
7 2000 3/4" x  3/4" 1440 3 5 Mechanical Seal En - 8
8 2500 3/4" x  3/4" 1440 3 5 Adjusting Screw  En - 8
9 Bush Bronze

Back  
  Next
Line

Copyright © 2010-2011, All Right Reserved, Apollo Mechanical Industries